Sorbitol production from mixtures of molasses and sugarcane bagasse hydrolysate using the thermally adapted Zymomonas mobilis ZM AD41.

Byproducts from the sugarcane manufacturing process, specifically sugarcane molasses (SM) and sugarcane bagasse (SB), can be used as alternative raw materials for sorbitol production via the biological fermentation process. This study investigated the production of sorbitol from SM and sugarcane bagasse hydrolysate (SBH) using a thermally adapted Zymomonas mobilis ZM AD41. Various combinations of SM and SBH on sorbitol production using batch fermentation process were tested. The results revealed that SM alone (FM1) or a mixture of SM and SBH at a ratio of 3:1 (FM2) based on the sugar mass in the raw material proved to be the best condition for sorbitol production by ZM AD41 at 37 °C. Further optimization conditions for sorbitol production revealed that a sugar concentration of 200 g/L and a CaCl2 concentration of 5.0 g/L yielded the highest sorbitol content. The maximum sorbitol concentrations produced by ZM AD41 in the fermentation medium containing SM (FM1) or a mixture of SM and SBH (FM2) were 31.23 and 30.45 g/L, respectively, comparable to those reported in the literature using sucrose or a mixture of sucrose and maltose as feedstock. These results suggested that SBH could be used as an alternative feedstock to supplement or blend with SM for sustainable sorbitol production. In addition, the fermentation conditions established in this study could also be applied to large-scale sorbitol production. Moreover, the thermally adapted Z. mobilis ZM AD41 is also a promising sorbitol-producing bacterium for large-scale production at a relatively high fermentation temperature using agricultural byproducts, specifically SM and SB, as feedstock, which could reduce the operating cost due to minimizing the energy required for the cooling system.

Structure of the exopolyphosphatase (PPX) from Zymomonas mobilis reveals a two-magnesium-ions PPX.

Rapid adaptation of metabolic capabilities is crucial for bacterial survival in habitats with fluctuating nutrient availability. In such conditions, the bacterial stringent response is a central regulatory mechanism activated by nutrient starvation or other stressors. This response is primarily controlled by exopolyphosphatase/guanosine pentaphosphate phosphohydrolase (PPX/GPPA) enzymes. To gain further insight into these enzymes, the high-resolution crystal structure of PPX from Zymomonas mobilis (ZmPPX) was determined at 1.8 Å. The phosphatase activity of PPX was strictly dependent on the presence of divalent metal cations. Notably, the structure of ZmPPX revealed the presence of two magnesium ions in the active site center, which is atypical compared to other PPX structures where only one divalent ion is observed. ZmPPX exists as a dimer in solution and belongs to the "long" PPX group consisting of four domains. Remarkably, the dimer configuration exhibits a substantial and deep aqueduct with positive potential along its interface. This aqueduct appears to extend towards the active site region, suggesting that this positively charged aqueduct could potentially serve as a binding site for polyP.

Construction and comparison of different vehicles for heterologous gene expression in Zymomonas mobilis.

Zymomonas mobilis has the potential to be an optimal chassis for the production of bulk chemicals derived from pyruvate. However, a lack of available standardized and characterized genetic tools hinders both efficient engineering of Z. mobilis and progress in basic research on this organism. In this study, a series of different shuttle vectors were constructed based on the replication mechanisms of the native Z. mobilis plasmids pZMO1, pZMOB04, pZMOB05, pZMOB06, pZMO7 and p29191_2 and on the broad host range replication origin of pBBR1. These plasmids as well as genomic integration sites were characterized for efficiency of heterologous gene expression, stability without selection and compatibility. We were able to show that a wide range of expression levels could be achieved by using different plasmid replicons. The expression levels of the constructs were consistent with the relative copy numbers, as determined by quantitative PCR. In addition, most plasmids are compatible and could be combined. To avoid plasmid loss, antibiotic selection is required for all plasmids except the pZMO7-based plasmid, which is stable also without selection pressure. Stable expression of reporter genes without the need for selection was also achieved by genomic integration. All modules were adapted to the modular cloning toolbox Zymo-Parts, allowing easy reuse and combination of elements. This work provides an overview of heterologous gene expression in Z. mobilis and adds a rich set of standardized genetic elements to an efficient cloning system, laying the foundation for future engineering and research in this area.

Better off breathing: an explanation for the seemingly detrimental impact of aerobic respiration on Zymomonas mobilis.

The bacterium Zymomonas mobilis is best known for fermentatively producing more ethanol than yeast. However, Z. mobilis has also puzzled researchers for decades with the counterintuitive observation that disrupting aerobic respiration benefits aerobic growth, implying that fermentation remains favorable. Retention of detrimental respiration genes seemed to defy natural selection. New findings by Felczak et al. help clarify the importance of respiration for Z. mobilis and the factors that led to the confusing prior results (M. M. Felczak, M. P. Bernard, and M. A. TerAvest, 2023, mBio 14:e02043-23, https://doi.org/10.1128/mbio.02043-23). The team overcame redundancy from multiple genome copies to delete what turned out to be a key terminal oxidase. Unlike previous studies, wherein mutants exhibited low respiration rates and had improved aerobic growth, this mutant was incapable of respiration and had poor aerobic growth. Thus, respiration is important but surprisingly exceeds what is optimal under lab conditions. Respiration likely protects against toxic effects of oxygen, ensuring retention of respiration genes in the Z. mobilis genome.

Metabolic regulation boosts bioelectricity generation in Zymomonas mobilis microbial fuel cell, surpassing ethanol production.

Zymomonas mobilis (Z. mobilis), a bacterium known for its ethanol production capabilities, can also generate electricity by transitioning from ethanol production to electron generation. The purpose of this study is to investigate the ability of Z. mobilis to produce bioelectricity when utilized as a biocatalyst in a single-chamber microbial fuel cell (MFC). Given the bacterium's strong inclination towards ethanol production, a metabolic engineering strategy was devised to identify key reactions responsible for redirecting electrons from ethanol towards electricity generation. To evaluate the electroactivity of cultured Z. mobilis and its ethanol production in the presence of regulators, the reduction of soluble Fe(III) was utilized. Among the regulators tested, CuCl2 demonstrated superior effectiveness. Consequently, the MFC was employed to analyze the electrochemical properties of Z. mobilis using both a minimal and modified medium. By modifying the bacterial medium, the maximum current and power density of the MFC fed with Z. mobilis increased by more than 5.8- and sixfold, respectively, compared to the minimal medium. These findings highlight the significant impact of metabolic redirection in enhancing the performance of MFCs. Furthermore, they establish Z. mobilis as an active electrogenesis microorganism capable of power generation in MFCs.

Development of a counterselectable system for rapid and efficient CRISPR-based genome engineering in Zymomonas mobilis.

BACKGROUND: Zymomonas mobilis is an important industrial bacterium ideal for biorefinery and synthetic biology studies. High-throughput CRISPR-based genome editing technologies have been developed to enable targeted engineering of genes and hence metabolic pathways in the model ZM4 strain, expediting the exploitation of this biofuel-producing strain as a cell factory for sustainable chemicals, proteins and biofuels production. As these technologies mainly take plasmid-based strategies, their applications would be impeded due to the fact that curing of the extremely stable plasmids is laborious and inefficient. Whilst counterselection markers have been proven to be efficient for plasmid curing, hitherto only very few counterselection markers have been available for Z. mobilis. RESULTS: We constructed a conditional lethal mutant of the pheS gene of Z. mobilis ZM4, clmPheS, containing T263A and A318G substitutions and coding for a mutated alpha-subunit of phenylalanyl-tRNA synthetase to allow for the incorporation of a toxic analog of phenylalanine, p-chloro-phenylalanine (4-CP), into proteins, and hence leading to inhibition of cell growth. We demonstrated that expression of clmPheS driven by a strong Pgap promoter from a plasmid could render the Z. mobilis ZM4 cells sufficient sensitivity to 4-CP. The clmPheS-expressing cells were assayed to be extremely sensitive to 0.2 mM 4-CP. Subsequently, the clmPheS-assisted counterselection endowed fast curing of genome engineering plasmids immediately after obtaining the desired mutants, shortening the time of every two rounds of multiplex chromosome editing by at least 9 days, and enabled the development of a strategy for scarless modification of the native Z. mobilis ZM4 plasmids. CONCLUSIONS: This study developed a strategy, coupling an endogenous CRISPR-based genome editing toolkit with a counterselection marker created here, for rapid and efficient multi-round multiplex editing of the chromosome, as well as scarless modification of the native plasmids, providing an improved genome engineering toolkit for Z. mobilis and an important reference to develope similar genetic manipulation systems in other non-model organisms.

Elimination of editing plasmid mediated by theophylline riboswitch in Zymomonas mobilis.

Zymomonas mobilis is regarded as a potential chassis for the production of platform chemicals. Genome editing using the CRISPR-Cas system could meet the need for gene modification in metabolic engineering. However, the low curing efficiency of CRISPR editing plasmid is a common bottleneck in Z. mobilis. In this study, we utilized a theophylline-dependent riboswitch to regulate the expression of the replicase gene of the editing plasmid, thereby promoting the elimination of exogeneous plasmid. The riboswitch D (RSD) with rigorous regulatory ability was identified as the optimal candidate by comparing the transformation efficiency of four theophylline riboswitch-based backbone editing plasmids, and the optimal theophylline concentration for inducing RSD was determined to be 2 mM. A highly effective method for eliminating the editing plasmid, cells with RSD-based editing plasmid which were cultured in liquid and solid RM media in alternating passages at 37 °C without shaking, was established by testing the curing efficiency of backbone editing plasmids pMini and pMini-RSD in RM medium with or without theophylline at 30 °C or 37 °C. Finally, the RSD-based editing plasmid was applied to genome editing, resulting in an increase of more than 10% in plasmid elimination efficiency compared to that of pMini-based editing plasmid. KEY POINTS: • An effective strategy for curing CRISPR editing plasmid has been established in Z. mobilis. • Elimination efficiency of the CRISPR editing plasmid was enhanced by 10% to 20% under the regulation of theophylline-dependent riboswitch RSD.

The 2.4 Å structure of Zymomonas mobilis pyruvate kinase: Implications for stability and regulation.

Human liver pyruvate kinase (hlPYK) catalyzes the final step in glycolysis, the formation of pyruvate (PYR) and ATP from phosphoenolpyruvate (PEP) and ADP. Fructose 1,6-bisphosphate (FBP), a pathway intermediate of glycolysis, serves as an allosteric activator of hlPYK. Zymomonas mobilis pyruvate kinase (ZmPYK) performs the final step of the Entner-Doudoroff pathway, which is similar to glycolysis in that energy is harvested from glucose and pyruvate is generated. The Entner-Doudoroff pathway does not have FBP as a pathway intermediate, and ZmPYK is not allosterically activated. In this work, we solved the 2.4 Å X-ray crystallographic structure of ZmPYK. The protein is dimeric in solution as determined by gel filtration chromatography, but crystallizes as a tetramer. The buried surface area of the ZmPYK tetramerization interface is significantly smaller than that of hlPYK, and yet tetramerization using the standard interfaces from higher organisms provides an accessible low energy crystallization pathway. Interestingly, the ZmPYK structure showed a phosphate ion in the analogous location to the 6-phosphate binding site of FBP in hlPYK. Circular Dichroism (CD) was used to measure melting temperatures of hlPYK and ZmPYK in the absence and presence of substrates and effectors. The only significant difference was an additional phase of small amplitude for the ZmPYK melting curves. We conclude that the phosphate ion plays neither a structural or allosteric role in ZmPYK under the conditions tested. We hypothesize that ZmPYK does not have sufficient protein stability for activity to be tuned by allosteric effectors as described for rheostat positions in the allosteric homologues.

Bioethanol production from sorghum grain with Zymomonas mobilis: increasing the yield and quality of raw distillates.

BACKGROUND: The present study aimed to demonstrate the superiority of bioethanol yield and its quality from sorghum using the granular starch degrading enzyme Stargen™ 002 over simultaneous saccharification and fermentation, and separate hydrolysis and fermentation using Zymomonas mobilis CCM 3881 and Ethanol Red® yeast. RESULTS: Bacteria were found to produce ethanol at higher yield than the yeast in all fermentations. The highest ethanol yield was obtained with Z. mobilis during 48 h of simultaneous saccharification and fermentation (83.85% theoretical yield) and fermentation with Stargen™ 002 (81.27% theoretical yield). Pre-liquefaction in fermentation with Stargen™ 002 did not improve ethanol yields for both Z. mobilis and Saccharomyces cerevisiae. Chromatographic analysis showed twice less total volatile compounds in distillates obtained after bacterial (3.29-5.54 g L-1 ) than after yeast (7.84-9.75 g L-1 ) fermentations. Distillates obtained after bacterial fermentation were characterized by high level of aldehydes (up to 65% of total volatiles) and distillates obtained after yeast fermentation of higher alcohols (up to 95% of total volatiles). The process of fermentation using granular starch hydrolyzing enzyme cocktail Stargen™ 002 resulted in low amounts of all volatile compounds in distillates obtained after bacterial fermentation, but the highest amounts in distillates obtained after yeast fermentation. CONCLUSION: The present study emphasizes the great potential of bioethanol production from sorghum with Z. mobilis using granular starch hydrolyzing enzyme Stargen™ 002, which leads to reduced water and energy consumption, especially when energy sources are strongly related to global climate change. © 2023 Society of Chemical Industry.

Molecular mechanism of engineered Zymomonas mobilis to furfural and acetic acid stress.

Acetic acid and furfural (AF) are two major inhibitors of microorganisms during lignocellulosic ethanol production. In our previous study, we successfully engineered Zymomonas mobilis 532 (ZM532) strain by genome shuffling, but the molecular mechanisms of tolerance to inhibitors were still unknown. Therefore, this study investigated the responses of ZM532 and its wild-type Z. mobilis (ZM4) to AF using multi-omics approaches (transcriptomics, genomics, and label free quantitative proteomics). Based on RNA-Seq data, two differentially expressed genes, ZMO_RS02740 (up-regulated) and ZMO_RS06525 (down-regulated) were knocked out and over-expressed through CRISPR-Cas technology to investigate their roles in AF tolerance. Overall, we identified 1865 and 14 novel DEGs in ZM532 and wild-type ZM4. In contrast, 1532 proteins were identified in ZM532 and wild-type ZM4. Among these, we found 96 important genes in ZM532 involving acid resistance mechanisms and survival rates against stressors. Furthermore, our knockout results demonstrated that growth activity and glucose consumption of mutant strains ZM532∆ZMO_RS02740 and ZM4∆ZMO_RS02740 decreased with increased fermentation time from 42 to 55 h and ethanol production up to 58% in ZM532 than that in ZM532∆ZMO_RS02740. Hence, these findings suggest ZMO_RS02740 as a protective strategy for ZM ethanol production under stressful conditions.

Adaptive Laboratory Evolution and Metabolic Engineering of Zymomonas mobilis for Bioethanol Production Using Molasses.

Molasses with abundant sugars is widely used for bioethanol production. Although the ethanologenic bacterium Zymomonas mobilis can use glucose, fructose, and sucrose for ethanol production, levan production from sucrose reduces the ethanol yield of molasses fermentation. To increase ethanol production from sucrose-rich molasses, Z. mobilis was adapted in molasses, sucrose, and fructose in parallel. Adaptation in fructose is the most effective route to generate an evolved strain F74 with improved molasses utilization, which is majorly due to a G99S mutation in Glf for enhanced fructose import. Subsequent sacB deletion and sacC overexpression in F74 to divert sucrose metabolism from levan production to ethanol production further enhanced ethanol productivity 28.6% to 1.35 g/L/h. The efficient utilization of molasses by diverting sucrose metabolic flux through adaptation and genome engineering not only generated an excellent ethanol producer using molasses but also provided the strategy for developing microbial cell factories.

Characterization and Application of the Sugar Transporter Zmo0293 from Zymomonas mobilis.

Zymomonas mobilis is a natural ethanologen with many desirable characteristics, which makes it an ideal industrial microbial biocatalyst for the commercial production of desirable bioproducts. Sugar transporters are responsible for the import of substrate sugars and the conversion of ethanol and other products. Glucose-facilitated diffusion protein Glf is responsible for facilitating the diffusion of glucose uptake in Z. mobilis. However, another sugar transporter-encoded gene, ZMO0293, is poorly characterized. We employed gene deletion and heterologous expression mediated by the CRISPR/Cas method to investigate the role of ZMO0293. The results showed that deletion of the ZMO0293 gene slowed growth and reduced ethanol production and the activities of key enzymes involved in glucose metabolism in the presence of high concentrations of glucose. Moreover, ZMO0293 deletion caused different transcriptional changes in some genes of the Entner Doudoroff (ED) pathway in the ZM4-ΔZM0293 strain but not in ZM4 cells. The integrated expression of ZMO0293 restored the growth of the glucose uptake-defective strain Escherichia coli BL21(DE3)-ΔptsG. This study reveals the function of the ZMO0293 gene in Z. mobilis in response to high concentrations of glucose and provides a new biological part for synthetic biology.

Systematic Analysis of Metabolic Bottlenecks in the Methylerythritol 4-Phosphate (MEP) Pathway of Zymomonas mobilis.

Zymomonas mobilis is an industrially relevant aerotolerant anaerobic bacterium that can convert up to 96% of consumed glucose to ethanol. This highly catabolic metabolism could be leveraged to produce isoprenoid-based bioproducts via the methylerythritol 4-phosphate (MEP) pathway, but we currently have limited knowledge concerning the metabolic constraints of this pathway in Z. mobilis. Here, we performed an initial investigation of the metabolic bottlenecks within the MEP pathway of Z. mobilis using enzyme overexpression strains and quantitative metabolomics. Our analysis revealed that 1-deoxy-d-xylulose 5-phosphate synthase (DXS) represents the first enzymatic bottleneck in the Z. mobilis MEP pathway. DXS overexpression triggered large increases in the intracellular levels of the first five MEP pathway intermediates, of which the buildup in 2-C-methyl-d-erythritol 2,4-cyclodiphosphate (MEcDP) was the most substantial. The combined overexpression of DXS, 4-hydroxy-3-methylbut-2-enyl diphosphate (HMBDP) synthase (IspG), and HMBDP reductase (IspH) mitigated the bottleneck at MEcDP and mobilized carbon to downstream MEP pathway intermediates, indicating that IspG and IspH activity become the primary pathway constraints during DXS overexpression. Finally, we overexpressed DXS with other native MEP enzymes and a heterologous isoprene synthase and showed that isoprene can be used as a carbon sink in the Z. mobilis MEP pathway. By revealing key bottlenecks within the MEP pathway of Z. mobilis, this study will aid future engineering efforts aimed at developing this bacterium for industrial isoprenoid production. IMPORTANCE Engineered microorganisms have the potential to convert renewable substrates into biofuels and valuable bioproducts, which offers an environmentally sustainable alternative to fossil-fuel-derived products. Isoprenoids are a diverse class of biologically derived compounds that have commercial applications as various commodity chemicals, including biofuels and biofuel precursor molecules. Thus, isoprenoids represent a desirable target for large-scale microbial generation. However, our ability to engineer microbes for the industrial production of isoprenoid-derived bioproducts is limited by an incomplete understanding of the bottlenecks in the biosynthetic pathway responsible for isoprenoid precursor generation. In this study, we combined genetic engineering with quantitative analyses of metabolism to examine the capabilities and constraints of the isoprenoid biosynthetic pathway in the industrially relevant microbe Zymomonas mobilis. Our integrated and systematic approach identified multiple enzymes whose overexpression in Z. mobilis results in an increased production of isoprenoid precursor molecules and mitigation of metabolic bottlenecks.

Comparative study of ethanol production from sodium hydroxide pretreated rice straw residue using Saccharomyces cerevisiae and Zymomonas mobilis.

Rice straw is a suitable alternative to a cheaper carbohydrate source for the production of ethanol. For pretreatment efficiency, different sodium hydroxide concentrations (0.5-2.5% w/v) were tested. When compared to other concentrations, rice straw processed with 2% NaOH (w/v) yielded more sugar (8.17 ± 0.01 mg/ml). An alkali treatment induces effective delignification and swelling of biomass. The pretreatment of rice straw with 2% sodium hydroxide (w/v) is able to achieve 55.34% delignification with 53.30% cellulose enrichment. The current study shows the effectiveness of crude cellulolytic preparation from Aspergillus niger resulting in 80.51 ± 0.4% cellulose hydrolysis. Rice straw hydrolysate was fermented using ethanologenic Saccharomyces cerevisiae (yeast) and Zymomonas mobilis (bacteria). Overall, superior efficiency of sugar conversion to ethanol 70.34 ± 0.3% was obtained with the yeast compared to bacterial strain 39.18 ± 0.5%. The current study showed that pretreatment with sodium hydroxide is an effective method for producing ethanol from rice straw and yeast strain S. cerevisiae having greater fermentative potential for bioethanol production than bacterial strain Z. mobilis.

Investigating ethanol production using the Zymomonas mobilis crude extract.

Cell-free systems have become valuable investigating tools for metabolic engineering research due to their easy access to metabolism without the interference of the membrane. Therefore, we applied Zymomonas mobilis cell-free system to investigate whether ethanol production is controlled by the genes of the metabolic pathway or is limited by cofactors. Initially, different glucose concentrations were added to the extract to determine the crude extract's capability to produce ethanol. Then, we investigated the genes of the metabolic pathway to find the limiting step in the ethanol production pathway. Next, to identify the bottleneck gene, a systemic approach was applied based on the integration of gene expression data on a cell-free metabolic model. ZMO1696 was determined as the bottleneck gene and an activator for its enzyme was added to the extract to experimentally assess its effect on ethanol production. Then the effect of NAD+ addition at the high concentration of glucose (1 M) was evaluated, which indicates no improvement in efficiency. Finally, the imbalance ratio of ADP/ATP was found as the controlling factor by measuring ATP levels in the extract. Furthermore, sodium gluconate as a carbon source was utilized to investigate the expansion of substrate consumption by the extract. 100% of the maximum theoretical yield was obtained at 0.01 M of sodium gluconate while it cannot be consumed by Z. mobilis. This research demonstrated the challenges and advantages of using Z. mobilis crude extract for overproduction.

The escape of CRISPR-mediated gene editing in Zymomonas mobilis.

Clustered Regularly Interspaced Short Palindromic Repeats (CRISPR) systems have been widely applied for gene or genome editing. Adequate checking is important to screen mutants after CRISPR-mediated editing events. Here, we report gene escape cases after the knockout by Type I-F native CRISPR system in Zymomonas mobilis. Through amplifying both the gene of interest and its flanking homologous arms, followed by curing the editing plasmid, we found different destinies for gene-editing events. Some genes were readily knocked out and followed by the easy plasmid curing. In some other cases, however, the editing plasmid was difficult to remove from the cell, or the deleted genes were transferred into the editing plasmid. For example, the targeted region of fur can be integrated into the editing plasmid after the knockout, resulting in a spurious editing event. We supposed that the transfer of the gene may be attributed to bacterial insertion sequences. Searching for literatures on the gene knockout using CRISPR in bacteria reveals that the escape event is likely underestimated due to inadequate validation in other microbes. Hence, several strategies are proposed to enhance gene knockout and plasmid curing.

Zymo-Parts: A Golden Gate Modular Cloning Toolbox for Heterologous Gene Expression in Zymomonas mobilis.

Zymomonas mobilis is a microorganism with extremely high sugar consumption and ethanol production rates and is generally considered to hold great potential for biotechnological applications. However, its genetic engineering is still difficult, hampering the efficient construction of genetically modified strains. In this work, we present Zymo-Parts, a modular toolbox based on Golden-Gate cloning offering a collection of promoters (including native, inducible, and synthetic constitutive promoters of varying strength), an array of terminators and several synthetic ribosomal binding sites and reporter genes. All these parts can be combined in an efficient and flexible way to achieve a desired level of gene expression, either from plasmids or via genome integration. Use of the GoldenBraid-based system also enables an assembly of operons consisting of up to five genes. We present the basic structure of the Zymo-Parts cloning system, characterize several constitutive and inducible promoters, and exemplify the construction of an operon and of chromosomal integration of a reporter gene. Finally, we demonstrate the power and utility of the Zymo-Parts toolbox for metabolic engineering applications by overexpressing a heterologous gene encoding for the lactate dehydrogenase of Escherichia coli to achieve different levels of lactate production in Z. mobilis.

Genomic landscapes of bacterial transposons and their applications in strain improvement.

Transposons are mobile genetic elements that can give rise to gene mutation and genome rearrangement. Due to their mobility, transposons have been exploited as genetic tools for modification of plants, animals, and microbes. Although a plethora of reviews have summarized families of transposons, the transposons from fermentation bacteria have not been systematically documented, which thereby constrain the exploitation for metabolic engineering and synthetic biology purposes. In this review, we summarize the transposons from the most used fermentation bacteria including Escherichia coli, Bacillus subtilis, Lactococcus lactis, Corynebacterium glutamicum, Klebsiella pneumoniae, and Zymomonas mobilis by literature retrieval and data mining from GenBank and KEGG. We also outline the state-of-the-art advances in basic research and industrial applications especially when allied with other genetic tools. Overall, this review aims to provide valuable insights for transposon-mediated strain improvement. KEY POINTS: • The transposons from the most-used fermentation bacteria are systematically summarized. • The applications of transposons in strain improvement are comprehensively reviewed.

High-sodium maltobionate production by immobilized Zymomonas mobilis cells in polyurethane.

The purpose of this study was the production of maltobionic acid, in the form of sodium maltobionate, by Z. mobilis cells immobilized in polyurethane. The in situ immobilized system (0.125-0.35 mm) was composed of 7 g polyol, 3.5 g isocyanate, 0.02 g silicone, and 7 g Z. mobilis cell, at the concentration of 210 g/L. The bioconversion of maltose to sodium maltobionate was performed with different cell concentrations (7.0-9.0 gimobilized/Lreaction_medium), temperature (30.54-47.46 °C), pH (5.55-7.25), and substrate concentration (0.7-1.3 mol/L). The stability of the immobilized system was evaluated for 24 h bioconversion cycles and storage of 6 months. The maximum concentration of sodium maltobionate was 648.61 mmol/L in 34.34 h process (8.5 gdry_cell/Lreaction_medium) at 39 °C and pH 6.30. The immobilized system showed stability for 19 successive operational cycles of 24 h bioconversion and 6 months of storage, at 4 °C or 22 °C.